Description

 ELEGOO Saturn 2 adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.

[43% Larger Printing Volume] With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.

[Fresnel Collimating Light Source] Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with the FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength with 92% light uniformity, excellent printing accuracy, and a more smooth surface finish.

[Reliable Printing Performance] The Z-axis is designed with dual linear rails and non-slip hexagon socket leveling screws for ultra-steady & accurate movement and remarkable printing performance. The sandblasted surface build plate provides much stronger adherence and PFA release liner with easier model removal and less release tension.

[Odor-free Printing Environment] The air filtration system with an activated carbon filter can absorb most of the resin odor, creating an odor-free fresh printing environment. Double heat-conducting copper heat tubes with faster heat transfer and better heat dissipation efficiency prolong the service life of 3D printers

Description

【Bright and Stunning Colors】With high quality pigments and photo-initiators inside 8K photopolymer resin, the models printed with ELEGOO 8K standard photopolymer resin have a very pure and stunning color effect, just like an artwork.

【High Precision and Low Shrinkage】Extensive tests are done to verify low volume shrinkage and high printing accuracy of the 8K standard photopolymer resins before they are released to the public. Excellent dimension tolerance and low volume shrinkage ensure high precision of the printed models with incredibly smooth surface finishes, clear details, and accurate dimensions.

【Low Viscosity and Good Fluidity】With good fluidity, the resin can quickly infiltrate the model and then solidify to shape, improving the success rate of model printing, and reducing resin adhesion to the FEP film. While low viscosity guarantees excellent resin 3D printing performance, easy model removal, and prolongs the life of the release film.

【Non-Brittle and Less Odor】ELEGOO R&D team adopts a refined formula to minimized the odor with non-brittle, easy to clean, and good cleaning effect. You can easily create high-quality and intricate 3D models.

【Wide Applications】Specially designed for Saturn 2 8K LCD 3D printers, combine the ELEGOO 8K standard photopolymer resin with Saturn 2,  you’ll see smoother surface and clearer details than ever before. Widely suitable for most DLP/LCD 3D printers using the 405nm wavelength light source.

Description

ELEGOO Neptune 3 FDM 3D Printer with Auto Leveling, Removable HD Touch Screen, Dual Gear Metal Extruder, Ultra-Quiet Printing, Ideal for Beginners, 220x220x280mm Printing Size

[RSG leveling system] The 16-point RSG leveling system with a strain gauge pressure sensor on the print head to record the distance between the nozzle and the hot bed at each point. Once the sensor scans any tiny variations and unevenness, it will automatically compensate each point by adjusting the Z-axis height to ensure the same distance between the print nozzles and the bed (about 0.1-0.2mm). And Neptune 3 comes with a larger build volume of 220x220x280mm than Neptune 2. 

[Reliable Extrusion System] The double-gear metal extruder is designed with a spring elasticity adjustment and a special titanium alloy throat pipe for smoother filament feeding and more stable & precise printing, greatly reducing the risk of nozzle clogging.

[Ultra-Quiet Printing] XYZ axis adopts TMC2225 silent driver and E0 axis of TMC2209 silent driver, which ensures more stable and smooth movement at a whisper-quiet below 50dBA. V-guide roller made of POM for stable and accurate motion, quieter, wear-resistance, and longer life.

[PEI Magnetic Platform] The PEI spring steel magnetic platform with a special coating features anti-warping and high stickiness, and you can remove printed models merely by bending the steel sheet. With a filament sensor, whenever filament runs out, breaks, or gets clogged, printing will pause until you load the filament and resume.

[Removable Touchscreen] The 4.3-inch removable full-color touch screen can be operated by hand-held or fixed on the base with an intuitive interface and step-by-step assistance, which is more convenient to operate and support multi-language freely switch.

Description

ELEGOO PLA Filament 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, Compatible with Most FDM Printer, 5KG/Set (1KG/Spool, 2.2 lbs)

[High-Quality PLA Filaments] Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish.

[Dimensional Accuracy & Consistency]  Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm; 1 kg spool (2.2lbs).

[Less-tangle and Easy to Use] Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding.

[Clog-Free & Bubble-Free] Designed and manufactured with clog-free, superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for 24 hours before packaging and vacuum sealed with desiccants in the bag to protect the filament from moisture, no clogging and bubbling problems.

[Wide Compatibility] Universal compatibility with most of the common 1.75mm FDM 3D printers on the market due to the high-quality standards in terms of manufacturing accuracy and a small dimensional tolerance of +/- 0.02mm.

Description

[Big Volume + High Detail Precision] 12.8" 6K LCD screen, with the higher resolution on the 6k LCD, the higher model quality than you normally get on resin printers.

[All-metal Structure] The whole body and major components are all made of high-strength metal; the material is resistant to aging and is not easily scratched. 

[5-inch Capacitive Touch Screen] The 5.0" capacitive screen is easy to view and touch. The multi-language UI interface designed does not delay or freeze.

[Automatic Resin Feeding] The well-designed automatic resin tank feeding inlet provides a resin backup whenever needed during the length of your print. 

[Ball Screw] The Z-axis adopts a high-quality ball screw for smooth and durable operation, and the whole printing process is quiet and silent compared to other printers.

[COB Light Source] Powerful internal COB light source, high light utilization, and light power. High-density integrated LED, uniform light distribution, better print results. 

[Built-in Mini Air Purifier] Equipped with a mini air purifier, activated carbon can absorb and filter the irritant resin odor, a fresh and safe user experience.

[Chitubox Pro Slicer] Free One-year CHITUBOX Pro license(Reg.$169). It supports mainstream CAD File Formats, compatible with CHITUBOX Basic and other third-party slicers.

[Warranty Commitment] One-year warranty on the whole printer (6K LCD, FEP film, and tool kit excluded). Quality and fast customer service.

Description

[Transparent Yellow Shade] Effective blocking 99.9% UV light. The maximum size of the supporting printer is 9.1 inches

[Faye Mirror Design] The entire effective curing area, light power distribution more uniform.

[360 Degree Three-Dimensional Curing] Curing platform can be 360 Degree automatic rotation, curing size φ200 * 260mm.

[Bottom Light Source Design] The bottom to increase the light source design, the base can also be cured, do not let go of every detail, fully curing the model.

[Sealed Water Tank & Large-Capacity Design] 8000ML large-capacity design, using rubber sealing strips, safe and reliable.

[Operation Knob] Long press 3 seconds to turn on the machine, integrated operation panel plus light with, simple operation.

[Super Long Time Setting] Maximum adjustment of 30 minutes.

[Dual Connector Power Adapter] To meet the needs of CURE and WASH work at the same time.

[Curing Mode and Cleaning Mode Completely Separate] MERCURY X WASH and MERCURY X CURE can work at the same time, one for cleaning work and one for curing work.

Description

[Faster Printing] Saturn S 3D printer comes with a 9.1-inch 4K HD Monochrome LCD of 4098 x 2560 resolution, which shortens the printing time per layer to 2s-3s while restoring the vivid details of the original models. Low energy consumption and heat emission extend the lifespan of the mono LCD by 3 times.

[Larger Build Volume] With a larger printing volume of 196mm*122mm*210mm/7.71in*4.80in*8.26in, you can print bigger complex structural parts, or multiple small 3D models at a time, which greatly increases your printing efficiency.

[Higher Printing Accuracy] The matrix light source of 54 UV LEDs emits an optimal uniform light beam of 405nm wavelength for rapid prototyping, ensuring a sleek and delicate surface of a 3D printed model and more accurate printing size.

[Super Stable Structure] The Z-axis adopts a double linear guide-way shock absorption unit, with an accuracy of 0.00125mm for more stable and accurate moving to reduce the risk of layer shifting. The build plate with sandblasted surface has a stronger adhesion, and the set screws on which have long-lasting leveling performance without frequent calibration.

[Pleasant Printing Experience] The replaceable activated carbon filter on the USB port can effectively absorb and filter the resin odor and pungent fumes, bringing you a refreshing printing experience.

Description

• 【Dual Function】Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficient with less effort to meet your different needs.
• 【Fexible Washing Mode】The models can be placed in the cleaning basket to clean separately, or mount the build plate with models on it and wash them together, which can avoid direct contact to the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
• 【Intelligent Curing Control】Built-in 8pcs 385nm plus 8pcs 405nm UV curing lamp beads, work together with the 360-degree rotating curing turntable, which can cure the models evenly. 0.96 inch TFT LCD screen can visually display the set time and the remaining time. With automatic protection, picking up the cover in the operating state will suspend operation and emit a beeping sound. The cover can block 99.95% of ultraviolet rays to protect your vision.
• 【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, photon, photon s on the market, which provides you ideal support for your 3D resin prints.

ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine

Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficient with less effort to meet your different needs. 

It is compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Mars2， Mars 2 Pro on the market, which provides you ideal support for your 3D resin prints.

Description

Description

• 【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish.
• 【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile, its great stability and proper hardness guarantee a worry-free printing experience and successful printing.
• 【Bright and Stunning Colors】: With high-quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.
• 【Wide Applications】Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.
• 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the resin stays in place where they belong

Product Features:

1. Using soybean oil as raw material, BPA-free, natural green LCD light-curing material that complies with EN 71-3:2013.
2. Fast curing and no deformation during the molding process, the surface of the finished product is smooth and high precision.
3. The finished product has good strength and flexibility, excellent molding and impact resistance, and some elasticity.

Exposure parameter:
Bottom Exposure: 20-60s
Normal Exposure: 1.5-15s

Resin parameter:
Hardness: 80-84D;
Viscosity (25°C): 200-400 mPa·s
Liquid Density: 1.05-1.25 g/cm³
Solid Density: 1.05-1.25 g/cm³ F
lexure Strength: 19.86±10% Mpa
Extension Strength: 27.46±10% Mpa

Description

• 【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish.
• 【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile, its great stability and proper hardness guarantee a worry-free printing experience and successful printing.
• 【Bright and Stunning Colors】: With high-quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.
• 【Wide Applications】Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with LCD 3D Printers.
• 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the resin stays in place where they belong 

 

Precautions:

Dealing with resin could be messy and risky sometimes. To have a safer and better user experience, please follow the instructions below：

• Shake well before use
• Recommended temperature 20°C - 25°C
• Always wear gloves and a mask to avoid direct skin contact
• Keep away from children, dust, and direct sunlight
• Wash with plenty of water immediately if you get direct skin contact with resin

Printing Setting:

• Bottom Exposure:60s
• Normal Exposure:8s

Resin Parameters:

• Viscosity: 150-250MPa·s
• Absorption band: 385nm-410nm(wavelength)
• Desity: 1.05-1.25g/cm3
• Flexural Modulus: 1.882-2.385Mpa
• Bending Strength: 40-70mpa

• Thermal Deformation Temperature: 80℃
• Volume Shrinkage: 3.72-4.24%
• Linear Shrinkage: 1.05-1.35%
• Tensile Strength: 30-52mpa
• Tensile Modulus: 1.779-2.385mpa
• Shore Hardness: 75D
• Glass Transition Temperature: 100℃
• Notch Impact Strength: 41-48j/m