- Product Description
- Resource
Main Features:
- 【Brand New PLA+ Filaments】Made of American Natureworks 4032D eco-friendly raw material, which features low warpage and shrinkage, excellent printability, high strength, good ductility, and odorless when printing.
- 【Tough & High Impact Strength】With enhanced toughness and better tensile strength, ELEGOO PLA+ has even higher impact strength and less brittleness & deformation than usual PLA. Meanwhile, the better cooling effect makes the overhang printing effect better and higher success rate of printing suspended models.
- 【Glossy Surface & Good Layer Adhesion】Accurate deposition and strong layer bonding bring a smoother surface finish without layer delamination issues. The lower printing temperature and stable thermoforming dimensions make it very easy to print with excellent print quality.
- 【Less-tangle & Neatly Wound】Full mechanical winding with secondary sub-winding and strict manual inspection ensures that the lines are neatly arranged on the reels, which effectively reduces the occurrence of crossed turns and tangles and avoids possible snap and line breakage. With an eco-friendly design in mind, our PLA+ adopts the cardboard spool, which degrades faster than plastic spools and is more eco-friendly. In addition, there are three holes for monitoring the remaining filaments and timely replacement.
- 【Dimensional Accuracy & Consistency】 Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and optimal flow through the extruder for these 1.75mm PLA+ filaments with a dimensional accuracy of +/- 0.02mm.
- 【No Clogging & No Bubbles】Complete dried before packing and vacuum sealed with desiccants in the bag to protect the filament from moisture and dust, no clogs and no bubbles. Perfectly compatible with most 1.75mm FDM 3D printers on the market.
Parameters:
Recommended Extrusion/Nozzle Temp: 200°C - 230°C
Recommended Heated Bed Temp: 50-65°C
Dimensional Accuracy 99% Probability: +/- 0.02mm
Printing Speed: 30~70 mm/s
Net Weight: 1 kg/spool (2.2 lbs)
Density: 1.25 (g/cm³)
Tensile strength (X-Y) : ≥ 60 (MPa)
Elongation at break (X-Y) : 23 (%)
Bending modulus : 1911 (MPa)
Bending strength : 76 (MPa)
Charpy impact strength : 9 (kJ/m²)
ELEGOO PLA+ Filament 1.75mm 3D Printer Filament
3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, Tough & High Strength, Compatible with Most FDM Printers (1KG/Spool, 2.2 lbs)
Comparison of ELEGOO PLA parameters
Recommended Extrusion/Nozzle Temp:
190°C - 220°C（recommended 205°C）
200°C -230°C（recommended 215°C）
200-230°C（recommended 220°C）
Recommended Heated Bed Temp:
50-65°C
50-65°C
40-60°C
Printing Speed:
30~70mm/s
30~70 mm/s
30~600 mm/s
Print layer thickness:
0.2mm
0.2mm
0.2mm
Recommended Platform:
Glass/Fiberglass Board/PVP glue stick or textured paper
Glass/Fiberglass Board/PEI+PVP glue stick or textured paper
Glass/Fiberglass Board/PEI+PVP glue stick or platform spray
Dimensional Accuracy 99% Probability:
+/- 0.02mm
+/- 0.02mm
+/- 0.02 mm
Net Weight:
1 kg/spool (2.2 lbs)
1 kg/spool (2.2 lbs)
1 kg/spool (2.2 lbs)
Density:
1.2(g/cm³)
1.25（g/cm³）
1.2（g/cm³）
Tensile strength (X-Y) :
≥ 50（MPa）
≥60（MPa）
≥60（MPa）
Elongation at break (X-Y) :
11.2 (%)
23（％）
19 (%)
Bending modulus :
1913（MPa）
1911（MPa）
2680（MPa）
Bending strength :
91（MPa）
76（MPa）
80（MPa）
Charpy impact strength :
5.4（kJ/m²）
9（kJ/m²）
3.85 (kJ/m²)
Melt Index:
14(190℃/2.16kg)g/10min
10(190℃/2.16kg)g/10min
8.2(190°C/2.16kg)g/10min
Thermal Distortion Temp:
53°C (0.45MPa)
53°C (0.45MPa)
53°C (0.45MPa)
Fan:
100%
100%
100%
Rockwell Hardness:
88
88
88
Support Files & Resources: