- Description
- Parameters
- Amazing Detail
- No Expensive cleaners
- Water washable. No detergent or alcohol required and can clean any residual stains directly with water.
Wash away uncured resin using only water
With Water Washable Resin, you no longer need to use expensive and dangerous solvents like acetone or alcohol to remove excess resin on your 3D prints – simply rinse with water, what is safe and free.
Great Aesthetics and easy to clean
Prints made with Water Washable Resin are attractive and durable, with applications ranging from secondary school projects to industry use. Printing with water washable resin is the same as printing with any other common resin and requires no additional expertise. Dissolving excess resin in water is simple and straightforward, requiring only a short period of rinsing or soaking.
Compatible with DLP/SLA printers
Water Washable Resin is designed to be compatible with full range of stereolithography (SLA), digital light projector (DLP) and liquid crystal display (LCD) 3D printers. High speed adhesion with faster curing time, higher precision prints and easy to take out from the printing plate.
- Bottom Exposure: 60s
- Normal Exposure: 8s
- Hardness: 80-85 D;
- Viscosity (25°C): 100-350 mPa·s
- Liquid Density: 1.05-1.25 g/cm³
- Solid Density: 1.05-1.25 g/cm³
- Volumetric shrinkage: 3.72-4.24 %
- Flexure Strength: 40-70 Mpa
- Extension Strength: 30-52 Mpa
- Shelf Life: 2 year
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
Support Files & Resources:
Comparison of ELEGOO Photopolymer Resin
MAX. FORCE (KGF):
TENSILE STRENGTH (MPA):
DEFORMATION AT THE POINT OF MAXIMUM FORCE (MM):
YIELD POINT ELONGATION (%):
ELONGATION AT BREAK (%):
FLEXURAL STRENGTH (MPA):
FLEXURAL MODULUS (MPA):
SHORE HARDNESS (D):
IMPACT STRENGTH (J/M) :
TENSILE MODULUS (MPA):
*REASON TO BUY* :