Hello, guys. If your Saturn 2 machine needs to replace the PFA film, please follow all steps below, and you need technical support please feel free to email us at 3dp@elegoo.com. We will offer your help in time.
ELEGOO PFA (FEP 2.0) RELEASE LINER FOR SATURN 2 3D PRINTER (5PCS)
Tools you need: 2.0mm Hex wrench, 2.5mm Hex wrench, 3.0mm Hex wrench, 40*60*5mm Foam, Knife;
STEPS: please check the YouTube video below
INSTRUCTIONAL VIDEO
