3D Printers & Accessories

Description

ELEGOO Neptune 4 Pro FDM 3D Printer with Up to 500mm/s Printing Speed, Auto Bed Leveling, Dual-Gear Direct Extruder, 300℃ High-temp Nozzle, Intelligent Segmented Heatbed, 225x225x265mm³ /8.85x8.85x10.43 Inch Printing Size

【Pre-installed Klipper Firmware】The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s  (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models. The 8GB RAM can store many models and quick access when needed.

【Dual-Gear Direct Drive Extruder】The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging.

【300°C High-temp Nozzle】With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed.

【Intelligent Segmented Heatbed】With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.

【Auto Bed Leveling + Auxiliary Leveling】With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality.

【Efficient Heat Dissipation】ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.

 

Description

ELEGOO Neptune 4 FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 225x225x265mm³ /8.85x8.85x10.43 Inches

【Pre-installed Klipper Firmware】With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models. 8G RAM provides enough storage space for fast printing. 

【Dual-Gear Direct Extruder】The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk.

【300°C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon.

【Auto Bed Leveling】The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend.

【Efficient & Instant Cooling】The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 4x4020 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed.

【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience.
The gantry's LED light strip with 30 beads and a hood, combined with an LED light on the nozzle for observing the model printing in a dark environment.

Description

ELEGOO Neptune 3 Max FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Ultra-Quiet Printing, Dual Lead Screw Drive, Massive Printing Size 420x420x500mm³ /16.53x16.53x19.68 In³

 

【Dual-Gear Direct Extruder】The dual-gear direct drive extruder with gears made of SUS303 stainless steel features adjustable extrusion force and a 3:1 reduction ratio, which ensures smoother filament feeding and stable & accurate printing, significantly reducing nozzle clogging and gear jumping problems. Ideal for printing PLA, PETG, ABS, and flexible filaments such as TPU.

 

【Massive Print Volume】With the largest ever build volume of 420x420x500 mm /16.53x16.53x19.68 inches, ELEGOO Neptune 3 Max gives you generous printing space to let your creativity run wild, whether for printing larger models, or printing in batches.

 

【Auto Bed Leveling + Auxiliary Leveling】The non-contact high precision sensor automatically scan 63 points of the hotbed to compensate for any unevenness and inconsistencies of the printing platform. You can also use the hand-twist knobs under the build platform for auxiliary leveling to achieve a perfect first layer.

 

【Stable & Quiet Printing】The Z-axis is designed with dual lead screws and dual-motor drive for more stable and precise movement of the print head, and the double tie rod structure enhances the stability of the Z-axis gantry.
With an STM 32-bit silent motherboard, the X/Y/Z/E axes are all driven by high-precision stepper motors to effectively reduce the printing noise under 50 dB.

 

【PEI Magnetic Platform】PEI magnetic platform with a special coating and spring steel sheet for solid adhesion and anti-warping, so you can easily remove or eject the print models by slightly bending the print steel sheet. The 420W high-power hotbed can quickly heat up to 100°C.

 

【Removable Capacitive Touchscreen】The 4.3-inch removable magnetic capacitive touch screen can be operated by hand-held or fixed on the base, with a print model preview function to preview the model image during printing, and observe the printing progress, supporting multi-language freely switch.
There also comes with a drawer toolbox on the machine base to store tools used by the printer such as Allen wrench and nozzle accessories.

 

Description

ELEGOO  3D Printer, Neptune 3 Plus FDM 3D Printer with 49-Point Auto Bed Leveling, Dual-Gear Direct Extruder, Ultra-Quiet Printing, Removable Capacitive Screen, Larger Printing Size of 320x320x400 mm / 12.59x12.59x15.74 Inches 

 

【Dual-Gear Direct Extruder】The new dual-gear direct extruder with a better grip on the filament and strong pushing force for smoother filament feeding and more stable & accurate printing, which greatly reduces the risk of nozzle blockage and under extrusion, and printing well with PLA, ABS, PETG and even flexible filaments like TPU.

 

【Larger Print Volume】The larger-than-average build volume of 320x320x400mm/12.59 x 12.59 x 15.74 inches gives you enough space to freely arrange your prints, print larger models, or carry out batch printing with high efficiency.

 

【Auto Bed Leveling】ELEGOO Neptune 3 Plus adopts a non-contact high precision sensor to collect the deviation data at 49 (7x7) points of the hotbed, and then automatically adjust the Z-axis height to compensate for any irregularities and unevenness of the printing bed. There are also hand-twisting knobs underneath the hotbed to fine-turn the print bed with a single twist, thus ensuring a perfect first-layer print.

 

【PEI Magnetic Platform】PEI magnetic platform with special coating and spring steel sheet for good adhesion and anti-warping, just gently bend the print steel plate to release or pop off the prints. The 420W high-power hotbed can quickly heat up to 100°C.

 

【Z-axis Dual Lead Screw】The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With an STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50 dB.

 

【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing, and observe the printing progress by previewing the real-time comparison image of the printed model.

 

Description

【Overview of Neptune 3 Pro】225*225*280mm market mainstream printing size can meet the needs of most users.
With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB.
The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.

 

【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.

 

【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.
The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
Fans on both sides of the print head ensure omnidirectional and rapid cooling of printed layers to improve the model details and overhang printing effect.

 

【Smarter Printing Experience】Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms)
Intelligent fan control: after printing, all fans will automatically stop working below 50℃ to extend fan lifespan, reduce noise, and save power.
Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.

 

【More Stable Printing】The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor.
The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.

 

【Ease of Use】PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet.
The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress.
The 250W high-power hotbed can quickly heat up to 100ºC and start printing.
The integrated LED light bar on the gantry can be operated by pressing the buttons on the screen to conveniently observe the model printing in a poor light environment.

 

Description

ELEGOO Neptune 3 FDM 3D Printer with Auto Leveling, Removable HD Touch Screen, Dual Gear Metal Extruder, Ultra-Quiet Printing, Ideal for Beginners, 220x220x280mm Printing Size

[RSG leveling system] The 16-point RSG leveling system with a strain gauge pressure sensor on the print head to record the distance between the nozzle and the hot bed at each point. Once the sensor scans any tiny variations and unevenness, it will automatically compensate each point by adjusting the Z-axis height to ensure the same distance between the print nozzles and the bed (about 0.1-0.2mm). And Neptune 3 comes with a larger build volume of 220x220x280mm than Neptune 2. 

[Reliable Extrusion System] The double-gear metal extruder is designed with a spring elasticity adjustment and a special titanium alloy throat pipe for smoother filament feeding and more stable & precise printing, greatly reducing the risk of nozzle clogging.

[Ultra-Quiet Printing] XYZ axis adopts TMC2225 silent driver and E0 axis of TMC2209 silent driver, which ensures more stable and smooth movement at a whisper-quiet below 50dBA. V-guide roller made of POM for stable and accurate motion, quieter, wear-resistance, and longer life.

[PEI Magnetic Platform] The PEI spring steel magnetic platform with a special coating features anti-warping and high stickiness, and you can remove printed models merely by bending the steel sheet. With a filament sensor, whenever filament runs out, breaks, or gets clogged, printing will pause until you load the filament and resume.

[Removable Touchscreen] The 4.3-inch removable full-color touch screen can be operated by hand-held or fixed on the base with an intuitive interface and step-by-step assistance, which is more convenient to operate and support multi-language freely switch.

Description

[Big Volume + High Detail Precision] 12.8" 6K LCD screen, with the higher resolution on the 6k LCD, the higher model quality than you normally get on resin printers.

[All-metal Structure] The whole body and major components are all made of high-strength metal; the material is resistant to aging and is not easily scratched. 

[5-inch Capacitive Touch Screen] The 5.0" capacitive screen is easy to view and touch. The multi-language UI interface designed does not delay or freeze.

[Automatic Resin Feeding] The well-designed automatic resin tank feeding inlet provides a resin backup whenever needed during the length of your print. 

[Ball Screw] The Z-axis adopts a high-quality ball screw for smooth and durable operation, and the whole printing process is quiet and silent compared to other printers.

[COB Light Source] Powerful internal COB light source, high light utilization, and light power. High-density integrated LED, uniform light distribution, better print results. 

[Built-in Mini Air Purifier] Equipped with a mini air purifier, activated carbon can absorb and filter the irritant resin odor, a fresh and safe user experience.

[Chitubox Pro Slicer] Free One-year CHITUBOX Pro license(Reg.$169). It supports mainstream CAD File Formats, compatible with CHITUBOX Basic and other third-party slicers.

[Warranty Commitment] One-year warranty on the whole printer (6K LCD, FEP film, and tool kit excluded). Quality and fast customer service.

Description

【10-Inch 12K Mono LCD】With a 10-inch 12K mono LCD boasting an incredible resolution of 11520x5120 and an XY resolution of 19x24μm, you can print highly detailed models with stunning clarity and precision. The 9H tempered glass above the LCD provides excellent durability and scratch resistance, effectively protecting the LCD screen from scratches and damage.

【Large Build Volume】With a spacious build volume of 218.88x122.88x260 mm³/8.62x4.84x10.24 inches, you can print larger objects with ease or multiple smaller models at once, increasing your productivity.

【Brand New Linux OS】ELEGOO Saturn 3 UItra is powered by a brand new Linux OS with 4G RAM, which guarantees stable file transfer and faster running speed, making your printing experience smoother and more efficient.

【Wi-Fi Transfer】Saturn 3 UItra supports Wi-Fi transfer of files, with transfer speeds of 6-10Mbps, and is compatible with both 2.4G and 5G networks, giving you the flexibility to transfer your files from your computer or mobile device with ease.

【Reliable Printing Performance】The printer's 4-point leveling system is easy to operate, and no need to repeat leveling after one leveling. The laser-engraved build plate provides excellent adhesion during the printing process and easy to remove models. The new ACF release liner film with less release tension for faster printing.

【User-Friendly Printing Experience】Saturn 3 UItra adopts a 4-inch HD IPS touch screen, with 800*480px and a new UI interface, and supports 12 languages.
The plug-in air purifier is connected via USB with a built-in activated carbon filter to absorb and filter resin odor during printing. The printer is also compatible with the upcoming ELEGOO Mars MATE air purifier.

Description

【10-Inch 12K Mono LCD】With a 10-inch 12K mono LCD boasting a stunning resolution of 11520x5120 and an XY resolution of 19x24μm, ELEGOO Saturn 3 is capable of producing highly detailed and intricate models with ease, at a printing speed of up to 70mm/h. The 9H hardness tempered glass protects the LCD screen from scratches and damage caused by resin dripping or penetration.

【Generous Build Volume】With a generous build volume of 218.88x122.88x250 mm³/8.62x4.84x9.84 inches, you can try to print larger models and more ambitious projects for greater flexibility and versatility.

【Fresnel Collimating Light Source】The COB light source and Fresnel collimating lens work together to emit a uniform light beam of 405nm wavelength, and ensure that the light angle reaches within 5°, light uniformity is over 90%, and light-scattering coefficient within 0.5%. This results in highly accurate and consistent prints with exceptional clarity and detail.

【Laser-carved Build Plate】The build plate with a laser-carved surface provides excellent adhesion, ensuring that your prints stick to the build plate for a higher printing success rate.

【Voxeldance Tango Software】It offers 3 printing modes: static mode and dynamic mode (including smooth mode and high-speed mode) to improve printing efficiency. The open-source GOO slice file format is compatible with third-party slice software, such as CHITUBOX and Lychee Slicer.

【Plug-in Air Purifier】The upgraded USB plug-in air purifier with a built-in activated carbon filter and plastic protective case ensures that harmful odor is purified during printing. In addition, you can choose the upcoming ELEGOO Mars MATE air purifier, which can remove up to 95% of VOCs for a safer environment to work in.

Description

 ELEGOO Saturn 2 adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.

[43% Larger Printing Volume] With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.

[Fresnel Collimating Light Source] Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with the FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength with 92% light uniformity, excellent printing accuracy, and a more smooth surface finish.

[Reliable Printing Performance] The Z-axis is designed with dual linear rails and non-slip hexagon socket leveling screws for ultra-steady & accurate movement and remarkable printing performance. The sandblasted surface build plate provides much stronger adherence and PFA release liner with easier model removal and less release tension.

[Odor-free Printing Environment] The air filtration system with an activated carbon filter can absorb most of the resin odor, creating an odor-free fresh printing environment. Double heat-conducting copper heat tubes with faster heat transfer and better heat dissipation efficiency prolong the service life of 3D printers

Description

[10-Inch 8K Mono LCD] ELEGOO Saturn 8K resin 3d printer comes with a 10-inch monochrome LCD screen with a resolution of 7680x4320 and an XY resolution of 28.5 microns. You can print sharper models with ultra-fine detail and tight tolerances, only requiring 1-3s exposure time per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness has excellent light transmission and screen protection.
[Large Build Volume] The Saturn 8K’s build volume of 219 x 123 x 210 mm gives you quite a bit more space for model printing creations with even better quality, whether a large model or batch parts can be done in one go to improve your printing efficiency.
[Matrix UV Light Source] The 28 LEDs matrix UV light source with a unique double convex lens design reduces light scattering and provides powerful light contrast so that the light is vertically projected on the LCD screen at a smaller angle of 5 degrees, thereby improving printing accuracy and reducing tolerances for prototype print dimensions.
[Rock-Solid Structure] The Z-axis is driven by a pair of linear rails with non-slip hexagon socket leveling screws for more stable and accurate motion. Sandblasted build plate has stronger adhesion during printing and the PFA release liner (FEP 2.0) with less release tension for easier model removal.
[A Hassle-free Printing Experience] The USB-powered purifier with activated carbon absorbs and filters the unpleasant resin odor during operation to create a fresh printing environment. The heat dissipation system adopts double heat-conducting copper heat tubes for faster ventilation and heat dissipation.

Description

[Faster Printing] Saturn S 3D printer comes with a 9.1-inch 4K HD Monochrome LCD of 4098 x 2560 resolution, which shortens the printing time per layer to 2s-3s while restoring the vivid details of the original models. Low energy consumption and heat emission extend the lifespan of the mono LCD by 3 times.

[Larger Build Volume] With a larger printing volume of 196mm*122mm*210mm/7.71in*4.80in*8.26in, you can print bigger complex structural parts, or multiple small 3D models at a time, which greatly increases your printing efficiency.

[Higher Printing Accuracy] The matrix light source of 54 UV LEDs emits an optimal uniform light beam of 405nm wavelength for rapid prototyping, ensuring a sleek and delicate surface of a 3D printed model and more accurate printing size.

[Super Stable Structure] The Z-axis adopts a double linear guide-way shock absorption unit, with an accuracy of 0.00125mm for more stable and accurate moving to reduce the risk of layer shifting. The build plate with sandblasted surface has a stronger adhesion, and the set screws on which have long-lasting leveling performance without frequent calibration.

[Pleasant Printing Experience] The replaceable activated carbon filter on the USB port can effectively absorb and filter the resin odor and pungent fumes, bringing you a refreshing printing experience.

Description

【7-Inch 9K Mono LCD】Equipped with a 7-inch 9K mono LCD offering an impressive 8520x4320 resolution and 18µm XY resolution, Mars 4 Ultra allows you to print incredible complex models with crisp details. The mono LCD is protected by a 9H hardness tempered glass, ensuring it withstands daily wear and tear while maintaining optimal performance.

【Powerful Linux OS】With built-in 4G RAM and no more delay loading files, the Linux operating system ensures faster & smooth operation and efficient resource management.

【Wi-Fi Connection】Effortlessly transfer files via the built-in WiFi connectivity, supporting both 2.4G and 5G networks with a transfer speed of 6-10Mbps, eliminating the need for cumbersome cables.

【Effortless Leveling】The 4-point hassle-free leveling system makes setup a breeze, and after one leveling, no need to repeat leveling, ensuring perfect prints every time. The laser-carved surface on the build plate offers improved adhesion, reducing the risk of print failures. Brand new ACF release liner film with less release tension for a high printing success rate even at a faster printing speed.

【User-Friendly Touch Screen】Navigate easily with the 4-inch HD IPS touch screen with a resolution of 800*480 pixels and support for 12 languages, making operation a breeze for users of all skill levels.

【Purified Printing Environment】The plug-in air purifier with an upgraded activated carbon filter that effectively filters out resin odor during printing. This feature enhances the overall printing experience and provides a healthier environment for you.