- 【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish.
- 【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.
- 【Bright and Stunning Colors】: With high-quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.
- 【Wide Applications】Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.
- 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the resin stays in place where they belong
ELEGOO Water Washable Photopolymer Resin is compatible with most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light sources to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints.
*The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processing to avoid environmental pollution.
This product comes with four features:
* Amazing Detail
* No Expensive cleaners
* No hazardous chemicals
* Water washable. No detergent or alcohol required and can clean any residual stains directly with water.
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
- Bottom Exposure: 60s
- Normal Exposure: 8s
- Hardness: 80-85 D;
- Viscosity (25°C): 100-350 mPa·s
- Liquid Density: 1.05-1.25 g/cm³
- Solid Density: 1.05-1.25 g/cm³
- Volumetric shrinkage: 3.72-4.24 %
- Flexure Strength: 40-70 Mpa
- Extension Strength: 30-52 Mpa
- Shelf Life: 1 year
Wash away uncured resin using only water
With Water Washable Resin, you no longer need to use expensive and dangerous solvents like acetone or alcohol to remove excess resin on your 3D prints – simply rinse with water, which is safe and free.
Great Aesthetics and easy to clean
Prints made with Water Washable Resin are attractive and durable, with applications ranging from secondary school projects to industrial use. Printing with water washable resin is the same as printing with any other common resin and requires no additional expertise. Dissolving excess resin in water is simple and straightforward, requiring only a short period of rinsing or soaking.
Compatible with DLP/SLA printers
Water Washable Resin is designed to be compatible with a full range of stereolithography (SLA), digital light projector (DLP), and liquid crystal display (LCD) 3D printers. High-speed adhesion with faster curing time, higher precision prints, and easy to take out from the printing plate.
ELEGOO water washable resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of applications from board game miniatures to industrial parts and components, such as professional prototyping, science fair projects, early-exposure engineering, secondary school classrooms, and so on.
The only limitation is your imagination. Print now and go with ELEGOO.