INTRODUCTION
This time we made a Transistor Tester with a #3DPrinted shell and an #ArduinoNano board. Tested by a multimeter, though the prototype may not be particularly precise, it's still fun to make use of the quarantine time with some hobby tinkering.
ELECTRONICS USED IN THIS PROJECT
Featured product:
Elegoo Arduino Nano V3.0+
Wiring diagram:
ASSEMBLY INSTRUCTION
You can learn how to make this Arduino based gadget step-by-step in the video below:
DOWNLOAD
Download code and schematic of this project here: https://bit.ly/3bBAM4f
And don't forget to share your makings with us on social networks.
