Description

• Compatible with ELEGOO Jupiter LCD 3D printers and other 12.8-inch LCD 3D printers.
• Film dimensions: 374*247mm; Film thickness: 0.127mm.

• Made of pure high-quality raw materials, wear-resistant, chemical-resistant, non-stick surface, UV stable, high-temp resistant, and the release performance is twice better than FEP1.0 with efficient separation effect for most resins.
• Durable for long-lasting use with a 50% longer life span than the regular version of the release film, and the release frequency can be up to 9000 times, smooth surface, no wrinkles, scratches and bubbles, which can meet the multiple requirements for printing and improve the printing success rate.
• 95% UV light transmittance ensures the right amount of UV to pass through to fastly and accurately cure 3D printed models with high quality. Perfectly fit, scratch-free, and less release tension for easy model removal.
• Thicker packaging with foam inside ensures that the PFA Release Liner Film is well protected in all directions from damage and avoids warps. Just follow the instructions and you'll be done in no time!

Description

Description

Description

• Compatible with ELEGOO Saturn MSLA Mono 3D printer
• 200*260 MM and with the thickness of 0.15mm; 95% light transmittance which ensures high stability of UV lightning
• Heat resistant from -240°C to 205°C and durable quality for long term usage
• Comes with an easy-to-follow tutorial on the package guiding you to replace the FEP film
• Compact cylinder package design not only keeps the films from easy creasing but also supplies a place saving

ELEGOO FEP release film liner is specialized for ELEGOO Saturn Mono MSLA 3D printer. FEP film is a consumable accessory of LCD 3D printers and great quality is essential if you don’t want to change it too often.

To change your FEP film is very easy. Simply follow the tutorial that comes with the package and with our new resin tank structure, you can easily replace the old FEP film in a few minutes. You can also follow the video instruction below:

Specification:

• UV Transparency: 95%
• Size: 200 * 260mm
• Thickness: 0.15mm
• Heat Resistance: -240°C to 205°C

Package Content:

5 x FEP Film 200 * 260mm

Package Size:

φ 47mm*220mm

Description

• Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.
• Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.
• Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.
• 95% UV light transmittance ensures the right amount of UV to pass through for faster and more accurate curing models, non-stick surface, wear-resistant, chemically resistant.
• The life span is 50% longer than the regular version of the release film, and the frequency of releases can be up to 9000 times, smooth surface, no wrinkles, scratches and bubbles.

Description

ELEGOO FEP release film liner is specialized for ELEGOO MARS Series LCD 3D printer.
FEP film is a consumable accessories of LCD 3D printers and great quality is essential if you don’t want to change it too often.
To change your FEP film is very easy. Simply follow the tutorial comes with the package and with our new resin tank structure, you can easily replace the old FEP film in a few minutes.

How to change the FEP:

Description

Description

Description

Description

Description

• Original resin tank used for ELEGOO MARS 3 PRO resin 3D printer, and the PFA release liner is pre-installed.
• Made of aluminum alloy, chemical corrosion resistance, not easy to deform, and durable for long-term usage, you don't need to worry about changing your resin vat frequently.
• The metal resin vat with screws to fix it in place, and the feet on the bottom to keep the PFA release liner from making contact with your workbench.
• Easy to assemble and replace with Allen wrench, and provide the extra lid to keep away dust, UV light source, or direct sunlight.
• Perfect spare resin vat when you need for faster change resin color and a better printing experience.

Description

• Orignal resin tank used on ELEGOO MARS 3D printer and the FEP film is pre-installed
• Made of anodized aluminum and durable design for long term usage
• The extra lid is provided to keep away dust, UV light source or direct sunlight
• Perfect spare resin vat when you need to change resin color faster and have a better printing experience 
• ELEGOO resin tank kit is also compatible with Photon, Photon S and Epax X1

ELEGOO Metal Resin Tank When it comes to a high-frequency printing environment, you are going to need a spare resin tank or vat to save some of your time. ELEGOO Metal Resin Tank Kit is here to help. ELEGOO Metal tank adopts aluminum alloy material, light and not easy to deform, durable and strong. It compatible with MARS, MARS PRO, Anycubic Photon, Photon S and Epax X1, according to your needs, you can replace your printer tank to extend the life of your printer.

List of components: Lid 2pcs Allen Wrench 2pcs Metal resin tank with FEP film 2 pre-installed parts

 NOTE:

•  Please wear a mask and gloves included in the kit When you operating.
• • Always remove the build platform before removing the resin tank to avoid dripping leftover material into the printer body.

Description

ELEGOO Washing Bucket for ELEGOO Mercury X/XS Bundle Washing and Curing Station, with 7000ML Large Capacity

• Original washing bucket for ELEGOO Mercury X/XS Bundle washing and curing machine. Bucket size: 183x148x248mm/7.2x5.82x9.76 inches.
• Durable Material: The washing bucket body is made of high-quality PP plastic, safe and non-toxic, good bending strength, excellent chemical stability, good heat and voltage resistance, and long service life.
• 3 Large-Capacity Design: With a 7000ml large capacity, you can directly wash models printed on ELEGOO Mars 2 & Mars 3 series and Saturn/Saturn S (with build plate), or batch clean parts removed from the build plate to improve your post-processing efficiency.
• Sealed Washing: The 7-liter water tank is designed with rubber sealing and pulsator washplates to effectively remove excess resin on the surface of models and prevent alcohol splashing and volatilizing during the cleaning process.
• 2 Washing Modes: For basket washing, remove the model from the build plate and put it into the basket for cleaning; for suspension washing, directly hang the build plate on the rack and start cleaning so you can avoid direct contact with the resin.

Description

• Original Washing Bucket used on ELEGOO Mercury Plus V2.0
• Perfect spare parts for ELEGOO Mercury Plus V2.0
  

• With a 3500ml capacity

Description

ELEGOO Metal Resin Tank for Saturn 3 Ultra LCD 3D Printer, ACF Release Liner Pre-Installed, with 3 Allen Wrench, Resin Vat for ELEGOO Saturn 3 Ultra

The original resin tank used for ELEGOO Saturn 3 Ultra LCD 3D printer, and the ACF release liner film is pre-installed.

Our resin tank is made of aluminum, providing a sturdy and durable base for your 3D printing needs, without frequently changing your resin vat.

Our metal resin tank is easy to assemble and replace, requiring only 3 Allen wrenches for installation and replacement.

Our resin tank is equipped with neat screws that fix it in place, ensuring that it remains stable and level during the printing process.

Our resin tank is designed with feet on the bottom, keeping the ACF release liner film from making contact with your workbench.

Dimension: 292.8*172.4*33mm; Resin suitability: works with all types of resin.

Description

Our build plate comes with a four-point leveling system, which requires only one-time leveling without the hassle of repeated leveling. This makes it a simple and efficient option for your 3D printing needs.

Our build platform has a laser-carved surface, providing increased model adhesion during the printing process and easy to remove models after printing.

Our build platform is made of aluminum alloy, ensuring that it is non-deformable with good flatness, providing a stable and reliable platform for your 3D printing needs.

The build plate screws have screw end caps to prevent resin from flowing inside the screws, ensuring that your build platform is easy to clean, and making post-processing a breeze.

Our build platform comes with an Allen wrench, ensuring that you can easily replace or fasten the screws as needed.