Printing Setting: (For Mars)
- Bottom Exposure:60s
- Normal Exposure:8s
Resin Parameters:
- Resin Type: ABS-like resin V2.0
- Hardness: 84 D; Shrinkage: 7.1 %
- Viscosity (25°C): 150-200 mPa.s
- Liquid Density: 1.100 g/cm³
- Solid Density: 1.195 g/cm³
- Flexure Strength: 59-70 Mpa
- Extension Strength: 36-53 Mpa
- Elongation at Break: 14.2
- Shelf Life: 2 year
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin