3D Printers

Description

ELEGOO Neptune 4 Max FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 420x420x480mm³/16.53x16.53x18.89 Inch Printing Size

【Pre-installed Klipper Firmware】The Neptune 4 Max comes with the powerful Klipper firmware, enabling impressive printing speeds of up to 500mm/s (default 250mm/s) and up to 8000mm/s accelerations, supporting advanced features such as input shaping and pressure advancing. Equipped with acceleration sensors on the X and Y axes for automatic calibration and improved print quality.

【Massive Build Volume】With a spacious build volume of 420x420x480mm³, our printer allows you to bring your ambitious designs to life, whether for large models or multiple smaller objects, this generous build volume provides ample space for your creations.

 【Dual-Gear Direct Extruder】Our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. The full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance.

【300°C High-Temp Nozzle Kit】Our printer features a high-temp nozzle kit capable of reaching up to 300°C. The extended hot end design, along with the 60W ceramic heating element and brass heating block ensure fast and uniform filament melting and extrusion. Automatic calibration of nozzle PID parameters further improves temperature control stability.

【Auto Bed Leveling + Auxiliary Leveling】Enjoy hassle-free bed leveling with the 121 (11x11) points auto bed leveling system! Additionally, auxiliary leveling by hand-twist knobs allows further fine-tuning, ensuring that your first-layer printing comes out perfectly every time.

【Effective Cooling Performance】The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for comprehensive and efficient heat dissipation. Two additional 6025 ball-bearing blower fans behind the print head quickly cool down the newly deposited hot filaments, preventing warping or deformation for better overhang and bridge results.

 

Description

ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size

【Pre-installed Klipper Firmware】Neptune 4 Plus comes with pre-installed Klipper firmware and supports input shaping and pressure advance. This enables an impressive printing speed of up to 500mm/s (default 250mm/s) while maintaining print quality. Both X-axis and Y-axis have acceleration sensors for automatic calibration of resonance compensation to minimize vibrations and improve print precision.

【Large Build Volume】Unleash your creativity with a generous build volume of 320x320x385mm³/12.59x12.59x15.15 inch. This sizable printing area allows you to create larger models or multiple smaller objects in a single print, expanding your creative possibilities.

【Dual-Gear Direct Extruder】The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing.

【300°C High-Temp Nozzle】The 300°C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon. The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance.

【Auto Bed Leveling + Auxiliary Leveling】Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions.

【Efficient Cooling System】The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation. The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.

 

 

Description

【10-Inch 12K Mono LCD】With a 10-inch 12K mono LCD boasting an incredible resolution of 11520x5120 and an XY resolution of 19x24μm, you can print highly detailed models with stunning clarity and precision. The 9H tempered glass above the LCD provides excellent durability and scratch resistance, effectively protecting the LCD screen from scratches and damage.

【Large Build Volume】With a spacious build volume of 218.88x122.88x260 mm³/8.62x4.84x10.24 inches, you can print larger objects with ease or multiple smaller models at once, increasing your productivity.

【Brand New Linux OS】ELEGOO Saturn 3 UItra is powered by a brand new Linux OS with 4G RAM, which guarantees stable file transfer and faster running speed, making your printing experience smoother and more efficient.

【Wi-Fi Transfer】Saturn 3 UItra supports Wi-Fi transfer of files, with transfer speeds of 6-10Mbps, and is compatible with both 2.4G and 5G networks, giving you the flexibility to transfer your files from your computer or mobile device with ease.

【Reliable Printing Performance】The printer's 4-point leveling system is easy to operate, and no need to repeat leveling after one leveling. The laser-engraved build plate provides excellent adhesion during the printing process and easy to remove models. The new ACF release liner film with less release tension for faster printing.

【User-Friendly Printing Experience】Saturn 3 UItra adopts a 4-inch HD IPS touch screen, with 800*480px and a new UI interface, and supports 12 languages.
The plug-in air purifier is connected via USB with a built-in activated carbon filter to absorb and filter resin odor during printing. The printer is also compatible with the upcoming ELEGOO Mars MATE air purifier.

Description

【10-Inch 12K Mono LCD】With a 10-inch 12K mono LCD boasting a stunning resolution of 11520x5120 and an XY resolution of 19x24μm, ELEGOO Saturn 3 is capable of producing highly detailed and intricate models with ease, at a printing speed of up to 70mm/h. The 9H hardness tempered glass protects the LCD screen from scratches and damage caused by resin dripping or penetration.

【Generous Build Volume】With a generous build volume of 218.88x122.88x250 mm³/8.62x4.84x9.84 inches, you can try to print larger models and more ambitious projects for greater flexibility and versatility.

【Fresnel Collimating Light Source】The COB light source and Fresnel collimating lens work together to emit a uniform light beam of 405nm wavelength, and ensure that the light angle reaches within 5°, light uniformity is over 90%, and light-scattering coefficient within 0.5%. This results in highly accurate and consistent prints with exceptional clarity and detail.

【Laser-carved Build Plate】The build plate with a laser-carved surface provides excellent adhesion, ensuring that your prints stick to the build plate for a higher printing success rate.

【Voxeldance Tango Software】It offers 3 printing modes: static mode and dynamic mode (including smooth mode and high-speed mode) to improve printing efficiency. The open-source GOO slice file format is compatible with third-party slice software, such as CHITUBOX and Lychee Slicer.

【Plug-in Air Purifier】The upgraded USB plug-in air purifier with a built-in activated carbon filter and plastic protective case ensures that harmful odor is purified during printing. In addition, you can choose the upcoming ELEGOO Mars MATE air purifier, which can remove up to 95% of VOCs for a safer environment to work in.

Description

ELEGOO Neptune 4 Pro FDM 3D Printer with Up to 500mm/s Printing Speed, Auto Bed Leveling, Dual-Gear Direct Extruder, 300℃ High-temp Nozzle, Intelligent Segmented Heatbed, 225x225x265mm³ /8.85x8.85x10.43 Inch Printing Size

【Pre-installed Klipper Firmware】The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s  (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models. The 8GB RAM can store many models and quick access when needed.

【Dual-Gear Direct Drive Extruder】The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging.

【300°C High-temp Nozzle】With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed.

【Intelligent Segmented Heatbed】With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.

【Auto Bed Leveling + Auxiliary Leveling】With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality.

【Efficient Heat Dissipation】ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.

 

Description

ELEGOO Neptune 4 FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 225x225x265mm³ /8.85x8.85x10.43 Inches

【Pre-installed Klipper Firmware】With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models. 8G RAM provides enough storage space for fast printing. 

【Dual-Gear Direct Extruder】The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk.

【300°C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon.

【Auto Bed Leveling】The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend.

【Efficient & Instant Cooling】The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 4x4020 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed.

【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience.
The gantry's LED light strip with 30 beads and a hood, combined with an LED light on the nozzle for observing the model printing in a dark environment.

Description

【7-Inch 9K Mono LCD】Equipped with a 7-inch 9K mono LCD offering an impressive 8520x4320 resolution and 18µm XY resolution, Mars 4 Ultra allows you to print incredible complex models with crisp details. The mono LCD is protected by a 9H hardness tempered glass, ensuring it withstands daily wear and tear while maintaining optimal performance.

【Powerful Linux OS】With built-in 4G RAM and no more delay loading files, the Linux operating system ensures faster & smooth operation and efficient resource management.

【Wi-Fi Connection】Effortlessly transfer files via the built-in WiFi connectivity, supporting both 2.4G and 5G networks with a transfer speed of 6-10Mbps, eliminating the need for cumbersome cables.

【Effortless Leveling】The 4-point hassle-free leveling system makes setup a breeze, and after one leveling, no need to repeat leveling, ensuring perfect prints every time. The laser-carved surface on the build plate offers improved adhesion, reducing the risk of print failures. Brand new ACF release liner film with less release tension for a high printing success rate even at a faster printing speed.

【User-Friendly Touch Screen】Navigate easily with the 4-inch HD IPS touch screen with a resolution of 800*480 pixels and support for 12 languages, making operation a breeze for users of all skill levels.

【Purified Printing Environment】The plug-in air purifier with an upgraded activated carbon filter that effectively filters out resin odor during printing. This feature enhances the overall printing experience and provides a healthier environment for you.

Description

【7-Inch 9K Mono LCD】Mars 4 boasts a 7-inch 9K mono LCD that boasts an impressive 8520x4320 resolution and 18μm XY resolution, enabling you to print crisp and intricate models every time with every detail of your model accurately rendered.

【Large Build Volume】The 153.36x77.76x175 mm³/6.04x3.06x6.89 inch build volume provides you with enough space for daily creations without sacrificing printing accuracy.

【COB Light Source】The Mars 4 uses a powerful COB light source that uniformly exposes the beam of 405nm wavelength across the entire LCD, ensuring that your prints are consistent and accurate.

【Laser-Carved Build Plate】The build plate has a laser-carved surface that provides excellent adhesion and ensures that models stick to the build plate during printing to improve the printing success rate.

【User-Friendly UI】The 3.5-inch touchscreen comes with a model preview function and a real-time progress bar that allows you to monitor the printing process and make adjustments as needed.

【Upgraded Air Purifier】The upgraded plug-in air purifier has a plastic protective case to protect the built-in activated carbon filter, effectively reducing resin odor during printing.

Description

• 【 Brand New DLP 3D Printer 】 ELEGOO MARS 4 DLP 3D printer adopts TI (Texas Instruments) DLP technology to project the 405 nm beam directly and concentrated onto the bottom of the resin tank with up to 95% light uniformity. Tempered glass replaces traditional LCD screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference. Meanwhile, the full-gray antialiasing algorithm greatly reduces the jagged edges, making the model surface smoother and more delicate.
• 【2W+ Hours Lifespan 】 The service life of the DLP projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen.
• 【 Low Power & Ultra-quiet Printing】12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB.
• 【 More Stable Structure 】 The Z-axis linear rail is thickened from 15 mm to 20 mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the printing success rate.
• 【 Smart Voxeldance Tango Slicer 】 Three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency. In addition, ELEGOO self-developed a new open-source GOO slicing format, which is compatible with multiple slicing software without restriction.
• 【 Purified Printing Environment 】 The USB-powered air purifier with built-in activated carbon can absorb and filter resin odor to create a refreshing printing environment. Or you can choose the upcoming ELEGOO's first large air purifier (247*210*410 mm) designed specifically for the photocuring field, which can remove formaldehyde and up to 80% of VOC.

Description

• 【9.1-inch 6K Mono LCD】ELEGOO MARS 4 Max features a 9.1-inch monochrome LCD screen with a resolution of 5760x3600 and an XY resolution of 34um, and printing speed up to 70mm/H. The 9H hardness tempered glass with excellent light transmission protects the LCD screen from scratches.
• 【COB+ Refractive Light Source】MARS 4 Max adopts the COB+ refractive light source to ensure that the emitted 405nm wavelength beam is more vertical and uniform on the entire LCD screen after refraction. Paired with the full grayscale anti-aliasing algorithm to make printed models with finer and more realistic details and a smoother surface.
• 【Large Build Volume】The large build volume of 195.84x122.4x150mm (7.71x4.81x5.9 inches) provides you with more creative space to print a large model or print multiple parts in batches, thus increasing your productivity.
• 【Efficient Heat Dissipation】Double fan cooling system design, one for air inlet and the other for air outlet, has faster air circulation and higher heat dissipation efficiency, which extends the service life of 3D printers.
• 【Voxeldance Tango Software】It has 3 printing modes: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, when the printed model cross-section is small, the print lifting speed is faster to improve printing efficiency; on the contrary, the printing speed will slow down. Combined with ELEGOO self-developed new open-source GOO slicing format, which supports multiple slicing software without restriction.
• 【Refreshing Printing Environment】The plug-in air purifier with a built-in activated carbon filter reduces resin stink for a refreshing printing environment. In addition, ELEGOO's first large-sized air purifier (247x210x410mm) with 80% VOC purification efficiency will be available soon.

Description

ELEGOO Neptune 3 Max FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Ultra-Quiet Printing, Dual Lead Screw Drive, Massive Printing Size 420x420x500mm³ /16.53x16.53x19.68 In³

 

【Dual-Gear Direct Extruder】The dual-gear direct drive extruder with gears made of SUS303 stainless steel features adjustable extrusion force and a 3:1 reduction ratio, which ensures smoother filament feeding and stable & accurate printing, significantly reducing nozzle clogging and gear jumping problems. Ideal for printing PLA, PETG, ABS, and flexible filaments such as TPU.

 

【Massive Print Volume】With the largest ever build volume of 420x420x500 mm /16.53x16.53x19.68 inches, ELEGOO Neptune 3 Max gives you generous printing space to let your creativity run wild, whether for printing larger models, or printing in batches.

 

【Auto Bed Leveling + Auxiliary Leveling】The non-contact high precision sensor automatically scan 63 points of the hotbed to compensate for any unevenness and inconsistencies of the printing platform. You can also use the hand-twist knobs under the build platform for auxiliary leveling to achieve a perfect first layer.

 

【Stable & Quiet Printing】The Z-axis is designed with dual lead screws and dual-motor drive for more stable and precise movement of the print head, and the double tie rod structure enhances the stability of the Z-axis gantry.
With an STM 32-bit silent motherboard, the X/Y/Z/E axes are all driven by high-precision stepper motors to effectively reduce the printing noise under 50 dB.

 

【PEI Magnetic Platform】PEI magnetic platform with a special coating and spring steel sheet for solid adhesion and anti-warping, so you can easily remove or eject the print models by slightly bending the print steel sheet. The 420W high-power hotbed can quickly heat up to 100°C.

 

【Removable Capacitive Touchscreen】The 4.3-inch removable magnetic capacitive touch screen can be operated by hand-held or fixed on the base, with a print model preview function to preview the model image during printing, and observe the printing progress, supporting multi-language freely switch.
There also comes with a drawer toolbox on the machine base to store tools used by the printer such as Allen wrench and nozzle accessories.

 

Description

ELEGOO  3D Printer, Neptune 3 Plus FDM 3D Printer with 49-Point Auto Bed Leveling, Dual-Gear Direct Extruder, Ultra-Quiet Printing, Removable Capacitive Screen, Larger Printing Size of 320x320x400 mm / 12.59x12.59x15.74 Inches 

 

【Dual-Gear Direct Extruder】The new dual-gear direct extruder with a better grip on the filament and strong pushing force for smoother filament feeding and more stable & accurate printing, which greatly reduces the risk of nozzle blockage and under extrusion, and printing well with PLA, ABS, PETG and even flexible filaments like TPU.

 

【Larger Print Volume】The larger-than-average build volume of 320x320x400mm/12.59 x 12.59 x 15.74 inches gives you enough space to freely arrange your prints, print larger models, or carry out batch printing with high efficiency.

 

【Auto Bed Leveling】ELEGOO Neptune 3 Plus adopts a non-contact high precision sensor to collect the deviation data at 49 (7x7) points of the hotbed, and then automatically adjust the Z-axis height to compensate for any irregularities and unevenness of the printing bed. There are also hand-twisting knobs underneath the hotbed to fine-turn the print bed with a single twist, thus ensuring a perfect first-layer print.

 

【PEI Magnetic Platform】PEI magnetic platform with special coating and spring steel sheet for good adhesion and anti-warping, just gently bend the print steel plate to release or pop off the prints. The 420W high-power hotbed can quickly heat up to 100°C.

 

【Z-axis Dual Lead Screw】The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With an STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50 dB.

 

【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing, and observe the printing progress by previewing the real-time comparison image of the printed model.

 

Description

 ELEGOO Saturn 2 adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.

[43% Larger Printing Volume] With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.

[Fresnel Collimating Light Source] Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with the FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength with 92% light uniformity, excellent printing accuracy, and a more smooth surface finish.

[Reliable Printing Performance] The Z-axis is designed with dual linear rails and non-slip hexagon socket leveling screws for ultra-steady & accurate movement and remarkable printing performance. The sandblasted surface build plate provides much stronger adherence and PFA release liner with easier model removal and less release tension.

[Odor-free Printing Environment] The air filtration system with an activated carbon filter can absorb most of the resin odor, creating an odor-free fresh printing environment. Double heat-conducting copper heat tubes with faster heat transfer and better heat dissipation efficiency prolong the service life of 3D printers

Description

[10-Inch 8K Mono LCD] ELEGOO Saturn 8K resin 3d printer comes with a 10-inch monochrome LCD screen with a resolution of 7680x4320 and an XY resolution of 28.5 microns. You can print sharper models with ultra-fine detail and tight tolerances, only requiring 1-3s exposure time per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness has excellent light transmission and screen protection.
[Large Build Volume] The Saturn 8K’s build volume of 219 x 123 x 210 mm gives you quite a bit more space for model printing creations with even better quality, whether a large model or batch parts can be done in one go to improve your printing efficiency.
[Matrix UV Light Source] The 28 LEDs matrix UV light source with a unique double convex lens design reduces light scattering and provides powerful light contrast so that the light is vertically projected on the LCD screen at a smaller angle of 5 degrees, thereby improving printing accuracy and reducing tolerances for prototype print dimensions.
[Rock-Solid Structure] The Z-axis is driven by a pair of linear rails with non-slip hexagon socket leveling screws for more stable and accurate motion. Sandblasted build plate has stronger adhesion during printing and the PFA release liner with less release tension for easier model removal.
[A Hassle-free Printing Experience] The USB-powered purifier with activated carbon absorbs and filters the unpleasant resin odor during operation to create a fresh printing environment. The heat dissipation system adopts double heat-conducting copper heat tubes for faster ventilation and heat dissipation.

Description

【Overview of Neptune 3 Pro】225*225*280mm market mainstream printing size can meet the needs of most users.
With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB.
The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.

 

【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.

 

【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.
The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
Fans on both sides of the print head ensure omnidirectional and rapid cooling of printed layers to improve the model details and overhang printing effect.

 

【Smarter Printing Experience】Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms)
Intelligent fan control: after printing, all fans will automatically stop working below 50℃ to extend fan lifespan, reduce noise, and save power.
Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.

 

【More Stable Printing】The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor.
The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.

 

【Ease of Use】PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet.
The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress.
The 250W high-power hotbed can quickly heat up to 100ºC and start printing.
The integrated LED light bar on the gantry can be operated by pressing the buttons on the screen to conveniently observe the model printing in a poor light environment.

 

Description

ELEGOO Neptune 3 FDM 3D Printer with Auto Leveling, Removable HD Touch Screen, Dual Gear Metal Extruder, Ultra-Quiet Printing, Ideal for Beginners, 220x220x280mm Printing Size

[RSG leveling system] The 16-point RSG leveling system with a strain gauge pressure sensor on the print head to record the distance between the nozzle and the hot bed at each point. Once the sensor scans any tiny variations and unevenness, it will automatically compensate each point by adjusting the Z-axis height to ensure the same distance between the print nozzles and the bed (about 0.1-0.2mm). And Neptune 3 comes with a larger build volume of 220x220x280mm than Neptune 2. 

[Reliable Extrusion System] The double-gear metal extruder is designed with a spring elasticity adjustment and a special titanium alloy throat pipe for smoother filament feeding and more stable & precise printing, greatly reducing the risk of nozzle clogging.

[Ultra-Quiet Printing] XYZ axis adopts TMC2225 silent driver and E0 axis of TMC2209 silent driver, which ensures more stable and smooth movement at a whisper-quiet below 50dBA. V-guide roller made of POM for stable and accurate motion, quieter, wear-resistance, and longer life.

[PEI Magnetic Platform] The PEI spring steel magnetic platform with a special coating features anti-warping and high stickiness, and you can remove printed models merely by bending the steel sheet. With a filament sensor, whenever filament runs out, breaks, or gets clogged, printing will pause until you load the filament and resume.

[Removable Touchscreen] The 4.3-inch removable full-color touch screen can be operated by hand-held or fixed on the base with an intuitive interface and step-by-step assistance, which is more convenient to operate and support multi-language freely switch.