3D Printer User Guide

Article Index

You can use the tag filter below to quickly find the content you are looking for.



ELEGOO MARS PRO: How to replace the UV light panel
Tools you need: 2.0mm Hex Wrench, 2.5mm Hex Wrench, Phillips Screwdriver, Slotted Screwdriver,...
Read More
ELEGOO MARS PRO: How to replace the Linear Rail and the Slider
The Structure Diagram of the ELEGOO MARS PRO: Tools you need: 2.0mm...
Read More
ELEGOO MARS PRO: How to replace the limit switch
If your printer needs replace the limit switch, please follow the steps below....
Read More
ELEGOO MARS PRO: How to improve Z-axis compression by reset Z-zero position
If your printer needs reset Z-zero position, please follow the steps below. Use...
Read More
ELEGOO MARS PRO: How to replace the ventilation fan
If your Mars Pro printer needs to replace the ventilation fan, please...
Read More
ELEGOO Mars: correct the “no authorization” error when updating the firmware
If you get an "no authorization" error when updating the printer's firmware,...
Read More
How to Refresh Machine Parameters of Your Printer
STEPS Step 1: Click the "Print" button on the printer screen Step...
Read More
ELEGOO Mars: ChiTu Slicer Setting Instruction
STEPS: Step 1: Click the third command button on the left, and...
Read More
ELEGOO MARS PRO: Replace the Z axis motor
If your Mars Pro printer needs to replace the Z axis motor,...
Read More
ELEGOO Mars: Assemble the Platform
If your Mars printer needs to assemble the platfrom, please follow the...
Read More
Elegoo MARS PRO: Level the Build Plate
If your Mars Pro printer needs to level the build plate, please follow the steps below:...
Read More
Elegoo MARS: Level the Build Platform
If your Mars printer needs to level the build platform, please follow...
Read More