3D Printer User Guide

Article Index

You can use the tag filter below to quickly find the content you are looking for.



ELEGOO Mars 2 : How to make an exhauster?
Hello guys, do you want to make an exhauster for your Mars...
Read More
ELEGOO Mars: correct the “no authorization” error when updating the firmware
If you get an "no authorization" error when updating the printer's firmware,...
Read More
How to Refresh Machine Parameters of Your Printer
STEPS Step 1: Click the "Print" button on the printer screen Step...
Read More
Lines or Layer Shifting on The Printed Model
If you got lines or layer shifting on your printed models from...
Read More
Buildplate Continues to Press down The LCD After Reaching The Bottom (Not identify "HOME")
When you encountered this "Buildplate Continues to Press down The LCD After...
Read More
Print Falls from The Support or Part of The Print Is Missing
When you encountered this "Print Fells from The Support or Part of...
Read More
What to Do After A Failed Print
If the printing fails, please do not start your next print immediately....
Read More
Holes in The 3D Printed Model
If you got holes in your 3D printed model, please follow the steps...
Read More
Model Sticking to The FEP Rather Than Sticking to The Build Platform
If you are experiencing the "Model not sticking to the build plate"...
Read More
Z-Axis Movement Being Freezed
If you are experiencing Z-Axis Movement Being Freezed, please follow the steps...
Read More
Z-Axis Movement Being Noisy
If the z-axis is noisy during operation, please try adding lubricating grease...
Read More
No Response When Booting The Printer
Step 1: Check if the indicator light of the power adapter is...
Read More